200kg Diesel Feed Pellet Machine

Diesel pellet machine is a mechanical equipment that uses the power of diesel engine to drive feed pellet machine granulation. This kind of machinery is often used to make feed pellets, especially in areas without three-phase electricity or unstable voltage.

In the production of feed particles,200kg diesel pellet machine can use a variety of crop straw, grass, leaves, rattan plants and other raw materials, through the grinding disc and press roller extrusion heating, to produce surface gelatinized, scented, in line with animal gnawing characteristics of feed particles. In this process, due to the high temperature of the machine, some bacteria will also be destroyed.

In addition, the 200kg diesel pellet machine is easy to operate and has a one-click start function. When used for the first time, it is necessary to add gear oil, check whether the motor or diesel engine steering is correct, adjust the screw of the press wheel, deploy the grinding material and other steps. In the boot process, it is necessary to pay attention to the rotation of the pressure wheel, if it does not turn, it should be adjusted in time. At first, a small amount of abrasive should be put in, and then a large amount of abrasive should be put in after normal discharge. After the end of the work, it is not necessary to clean the grinding bore for a short period of time. If it is not used in a short period of time, the abrasive material should be pressed into it to avoid plugging the hole.

In general, 200kg diesel pellet machine is an efficient and convenient feed pellet production machinery, with the advantages of saving feed costs and local materials. When purchasing, it is recommended to choose a machine with larger horsepower to obtain more stable power and output.

The working principle of the 200kg diesel pellet machine is to input the pre-treated material through the feed port into the pellet machine, and under the action of the high-speed rotating mesh ring, the material gradually becomes a granular material after extrusion, shear and friction. Finally, these granular materials are discharged from the discharge port into granular products. Specifically, the working principle of diesel pellet machine can be divided into the following steps:

1. After the material enters the pellet machine, it is first subjected to the action of the high-speed rotating mesh ring and is rapidly broken and stirred.

2. Under the action of the material around the mesh ring, the material is further refined and formed into a granular material through the extrusion and shearing of the gear pair.

3. The material is gradually formed and increased under the extrusion and heating of the grinding disc and press roller of the pellet machine, and finally becomes the feed particles that meet the requirements.

4. The molded feed particles are discharged through the discharge port and can be directly used for feeding animals.

Clibeanna Te: 200kg diesel feed pellet machine, China 200kg diesel feed pellet machine manufacturers, suppliers, factory